Technical Data Sheet
Electrical | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | IEC 60093 | > 1.0E+16 | ohms·cm |
Dissipation Factor? | 1 MHz 1 MHz | IEC 60250 | 0.002 | |
Dielectric Strength | | ASTM D149 | 35 | KV/mm |
Comparative Tracking Index | | IEC 60112 | PLC 0 | |
Dielectric Constant | 1 MHz 1 MHz | IEC 60250 | 3 | |
Arc Resistance | | ASTM D495 | PLC 6 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | 23℃ 23℃ | ISO 179 | 28 | kJ/m² |
Notched Izod Impact Strength | 23℃ 23℃ | ISO 180 | 9 | kJ/m² |
Unnotched Izod Impact Strength | 23℃ 23℃ | ISO 180 | 29 | kJ/m² |
Charpy Notched Impact Strength | 23℃ 23℃ | ISO 179 | 10 | kJ/m² |
物理性能 | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ISO 1183 | 1.42 | g/cm³ |
Modeling Shrinkage | TD Across Flow | 内部方法 | 0.50 to 0.80 | % |
Modeling Shrinkage | MD Flow | 内部方法 | 0.10 to 0.40 | % |
Moisture Absorption | Equilibrium,23℃,50% RH Equilibrium,23℃,50% RH 2 | ISO 62 | 0.02 | % |
机械性能 | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Modulus | | ISO 178 | 10000 | Mpa |
Tensile Modulus | | ISO 527-2 | 10600 | Mpa |
Tensile Strength | Break Break | ISO 527-2 | 115 | Mpa |
Tensile Strain | Break Break | ISO 527-2 | 1.6 | % |
Flexural Strength | | ISO 178 | 170 | Mpa |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
> 1.50 mm > 1.5 mm | | UL 94 | V-0 | |
Thermal | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 1.8 MPa,Unannealed 1.8 MPa,Unannealed | ISO 75-2/A | 245 | °C |
Heat Deflection Temperature | 0.45 MPa,Unannealed | ISO 75-2/B | 265 | °C |
Coefficient of Linear Thermal Expansion | TD:-30~30℃ TD:-30 to 30℃ | TMA | 0.000040 | 1/℃ |
Coefficient of Linear Thermal Expansion | MD:-30~30℃ MD:-30 to 30℃ | TMA | 0.000020 | 1/℃ |
Relative Temperature Index | 电气性能 | UL 746 | 50 | °C |
Relative Temperature Index | 强度机械性能 | UL 746 | 50 | °C |
Relative Temperature Index | 冲击机械性能 | UL 746 | 50 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.