Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage - Flow | 3.20 mm | ASTM D955 | 0.30 到 0.90 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation | Break, 3.20 mm | ASTM D638 | 2.0 | % |
Flexural Modulus | 3.20 mm | ASTM D790 | 9320 | Mpa |
Flexural Strength | Yield, 3.20 mm | ASTM D790 | 186 | Mpa |
Tensile Strength | Break, 3.20 mm | ASTM D638 | 113 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45 MPa, Unannealed, 6.40 mm | ASTM D648 | 260 | °C |
Deflection Temperature Under Load? | 1.8 MPa, Unannealed, 6.40 mm | ASTM D648 | 230 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | 23°C, 1.00 mm | ASTM D149 | 31 | KV/mm |
Comparative Tracking Index | Solution A | IEC 60112 | 400 到 600 | V |
Injection | Test Condition | Test Method | Test Result | Unit |
---|
Drying Temperature | | | 80 到 100 | °C |
Suggested Max Moisture | | | 0.020 | % |
Processing (Melt) Temp | | | 280 到 310 | °C |
Mold Temperature | | | 80 到 150 | °C |
Drying Time | | | 3.0 到 5.0 | hr |
Rear Temperature | | | 270 到 290 | °C |
Middle Temperature | | | 280 到 310 | °C |
Front Temperature | | | 290 到 310 | °C |
Nozzle Temperature | | | 280 到 310 | °C |
Screw Speed | | | 40 到 80 | rpm |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 0.8 mm | UL 94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.