Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD2 | ISO2577 | 0.70to0.90 | % |
Modeling Shrinkage | TD:90°C,1hr | ISO2577 | 0.10to0.20 | % |
Modeling Shrinkage | MD2 | ISO2577 | 0.70to0.90 | % |
Modeling Shrinkage | MD:90°C,1hr | ISO2577 | 0.10to0.20 | % |
Moisture Absorption | Saturation,23°C | ISO62 | 0.50 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.20 | % |
Apparent Density | | ISO60 | 0.65 | g/cm³ |
Melt Volume flow Rate | 260°C/5.0kg | ISO1133 | 18.0 | cm3/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Modulus | 23°C | ISO178 | 2150 | Mpa |
Flexural Stress | 23°C | ISO178 | 80.0 | Mpa |
Flexural Stress | 3.5%Strain,23°C | ISO178 | 70.0 | Mpa |
Nominal Tensile Strain at Break | 23°C | ISO527-2/50 | >50 | % |
Tensile Stress | Yield,23°C | ISO527-2/50 | 60.0 | Mpa |
Tensile Stress | Break,23°C | ISO527-2/50 | 50.0 | Mpa |
Tensile Strain | Yield,23°C | ISO527-2/50 | 5.0 | % |
Tensile Modulus | 23°C | ISO527-2/1 | 2200 | Mpa |
Flexural Strain | 23°C | ISO178 | 6.0 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
ThermalConductivity5 | 23°C | ISO8302 | 0.20 | W/m/K |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 110 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 85.0 | °C |
Linear thermal expansion coefficient | MD:23to55°C | ISO11359-2 | 9E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD:23to55°C | ISO11359-2 | 9E-05 | cm/cm/°C |
Vicat Softening Temperature | | ISO306/B120 | 126 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dissipation Factor? | 23°C,100Hz | IEC60250 | 7E-04 | |
Dissipation Factor? | 23°C,1MHz | IEC60250 | 4.5E-03 | |
Relative Permittivity | 23°C,100Hz | IEC60250 | 3.20 | |
Relative Permittivity | 23°C,1MHz | IEC60250 | 3.00 | |
Comparative Tracking Index | SolutionA | IEC60112 | 600 | V |
Comparative Tracking Index | SolutionB | IEC60112 | 125 | V |
Dielectric Strength | 23°C,1.00mm | IEC60243-1 | 30 | KV/mm |
Surface Resistivity | | IEC60093 | >1.0E+17 | ohms |
Volume Resistivity | 23°C | IEC60093 | >1.0E+17 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod impact strength | -30°C | ISO180 | NoBreak | |
Notched Izod impact strength | 23°C | ISO180 | NoBreak | |
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | NoBreak | |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | NoBreak | |
Multi-Axial Instrumented Impact Energy | -30°C | ISO6603-2 | 58.0 | J |
Multi-Axial Instrumented Impact Energy | 23°C | ISO6603-2 | 47.0 | J |
Multi-Axial Instrumented Impact Peak Force | -30°C | ISO6603-2 | 5000 | N |
Multi-Axial Instrumented Impact Peak Force | 23°C | ISO6603-2 | 3800 | N |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Ball Indentation Hardness | | ISO2039-1 | 108 | Mpa |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 1.6mm,BayerTest | UL94 | HB | |
Glow Wire Flammability Index | 2.0mm | IEC60695-2-12 | 750 | °C |
Oxygen Index | | ISO4589-2 | 21 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.