Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Specific Volume | | ASTM D792 | 0.82 | cm³/g |
Modeling Shrinkage(Across Flow) | 3.2 mm | Internal | 0.5~0.7 | % |
Modeling Shrinkage (Across Flow) | 3.2 mm | Internal | 0.6~0.8 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength(Yield) | 1.3 mm/ | ASTM D790 | 93 | Mpa |
Flexural Modulus | 1.3 mm/ | ASTM D790 | 2340 | Mpa |
Tensile Strength(Yield) | Type I, | ASTM D638 | 61 | Mpa |
Tensile Elongation (Break) | Type I, | ASTM D638 | 120 | % |
Flammability Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | | UL94 | 1.49 | mm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod Impact Strength | -30℃ (-22℉) | ASTM D256 | 106 | J/m |
Unnotched Izod Impact Strength | 23℃ (73℉) | ASTM D256 | 667 | J/m |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | | UL 746A | 2 | plc |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Relative Temperature Index | | UL 746B | 75 | °C |
Relative Temperature Index | | UL 746B | 75 | °C |
Relative Temperature Index | | UL 746B | 75 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.