Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage - Flow | Injection | ASTM D955 | 0.50 到 0.70 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | 23°C | ASTM D638 | 1520 | Mpa |
Tensile Modulus | 23°C | ISO 527-2 | 1540 | Mpa |
Tensile Elongation | Yield, 23°C | ASTM D638, ISO 527-2 | 6.0 | % |
Tensile Elongation | Break, 23°C | ASTM D638 | 180 | % |
Tensile Elongation | Break, 23°C | ISO 527-2 | 150 | % |
Flexural Strength | Yield, 23°C | ASTM D790 | 72.0 | Mpa |
Tensile Strength | Yield, 23°C | ASTM D638 | 45.0 | Mpa |
Tensile Strength | Yield, 23°C | ISO 527-2 | 44.0 | Mpa |
Tensile Strength | Break, 23°C | ASTM D638 | 56.0 | Mpa |
Tensile Strength | Break, 23°C | ISO 527-2 | 55.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45 MPa, Unannealed | ASTM D648 | 101 | °C |
Deflection Temperature Under Load? | 1.8 MPa, Unannealed | ASTM D648 | 88.0 | °C |
Injection | Test Condition | Test Method | Test Result | Unit |
---|
Drying Time | | | 4.0 到 6.0 | hr |
Drying Temperature | | | 88 | °C |
Processing (Melt) Temp | | | 260 到 282 | °C |
Mold Temperature | | | 38 到 66 | °C |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Unnotched Izod Impact Strength | -40°C | ASTM D4812 | 无断裂 | |
Unnotched Izod Impact Strength | 23°C | ASTM D4812 | 无断裂 | |
Drop Impact Resistance 2 | | 内部方法 | No Crazes/No Impact Failures | |
Instrumented Dart Impact | -40°C, Energy at Max Load | ASTM D3763 | 66.0 | J |
Instrumented Dart Impact | 23°C, Energy at Max Load | ASTM D3763 | 57.0 | J |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | R-Scale, 23°C | ASTM D785 | 109 | |
optical performance | Test Condition | Test Method | Test Result | Unit |
---|
Fill Volume Shrinkage 4 | Boiling, 1 hr | 内部方法 | 1.9 | % |
Fill Volume Shrinkage 4 | Boiling, 2 hr | 内部方法 | 2.3 | % |
Fill Volume Shrinkage 4 | Dishwasher | 内部方法 | 0.0 | % |
Transmittance | Total | ASTM D1003 | 91.0 | % |
Haze | -- | ASTM D1003 | < 1.0 | % |
Haze | -- 3 | 内部方法 | < 6.0 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.