TPEE PELPRENE™ P40UX TOYOBO JAPAN

Unit Price:
$3766 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
30MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	MD：2.00mm	ASTMD955	0.50	%
Moisture Absorption	Equilibrium,23°C,65%RH	ASTMD570	0.48	%
Melt Mass-Flow Rate	190°C/2.16kg	ASTMD1238	10	g/10min

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Taber Abrasion Resistance	1000Cycles	ASTMD1044	20.0	mg
Compressive Strength	10%Strain	ASTMD695	4.60	Mpa
Tensile Strength	--	ASTMD638	23.0	Mpa
Tensile Strength	Tensile Strength	50%Strain	ASTMD638	6.40	Mpa
Tensile Elongation	Break	ASTMD638	690	%
Flexural Modulus		ASTMD790	51.0	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Deflection Temperature Under Load?	1.8MPa,Unannealed	ASTMD648	<25.0	°C
Vicat Softening Temperature		ASTMD1525	120	°C
Brittleness Temperature		JISK6301	<-65.0	°C
Linear thermal expansion coefficient	MD	ASTME831	1.7E-04	cm/cm/°C
Melting temperature		DSC	172	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric Strength		JISK2111	20	KV/mm
Volume Resistivity		ASTMD257	2E+12	ohms·cm

Elastomers Properties	Test Condition	Test Method	Test Result	Unit
Compression Set		JISK6301	50	%

hardness	Test Condition	Test Method	Test Result	Unit
Shore Hardness	Shore A	JISK6301	89
Shore Hardness	Shore Hardness	Shore D	ASTMD2240	38

Flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating		UL94	HB

Supplementary information	Test Condition	Test Method	Test Result	Unit
Resilience		JISK6301	78	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.