Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
MediumDensity | | | 1.06 | g/cm³ |
SpecificHeatCapacityofMelt | | | 2090 | J/kg/°C |
ThermalConductivityofMelt | | | 0.16 | W/m/K |
Melt Volume flow Rate | 230°C/2.16kg | ISO1133 | 5.00 | cm3/10min |
Melt Mass-Flow Rate | 230°C/2.16kg | ISO1133 | 5.0 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ISO527-2 | 350 | Mpa |
Flexural Modulus | | ISO178 | 374 | Mpa |
Tensile Creep Modulus | 1hr | ISO899-1 | 310 | Mpa |
Abrasion Resistance | | ISO4649 | 110 | mm³ |
Tensile Creep Modulus | 1000hr | ISO899-1 | 260 | Mpa |
Tensile Stress | 300%Strain | ISO527-2 | 32.0 | Mpa |
Tensile Stress | Yield | ISO527-2 | 21.0 | Mpa |
Tensile Stress | Break | ISO527-2 | 44.0 | Mpa |
Tensile Stress | 5.0%Strain | ISO527-2 | 12.0 | Mpa |
Tensile Stress | 10%Strain | ISO527-2 | 17.8 | Mpa |
Tensile Stress | 50%Strain | ISO527-2 | 20.0 | Mpa |
Tensile Stress | 100%Strain | ISO527-2 | 23.0 | Mpa |
Tensile Strain | Yield | ISO527-2 | 30 | % |
Tensile Strain | Break | ISO527-2 | >300 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Brittleness Temperature | | ISO974 | -70.0 | °C |
Melting Temperature | | ISO11357-3 | 211 | °C |
Elastomers Properties | Test Condition | Test Method | Test Result | Unit |
---|
TearStrength-Flow | | ISO34-1 | 180 | kN/m |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Shore Hardness | Shore D | ISO868 | 65 | |
Shore Hardness | Shore D,15sec | ISO868 | 60 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
FMVSS Flammability | | FMVSS302 | B | |
Burning Rate | 1.00mm | ISO3795 | <100 | mm/min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.