Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | | ISO 294-4 | 1.7 | % |
Moisture Absorption | 24hr | ISO 62 | 0.5 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Impact Strength | | ISO 179/IeA | PARTIAL BREAK | kJ/㎡ |
Tensile strength | | ISO 527 | 36 | Mpa |
Insulation failure strength | | IEC 60243 | 17 | KV/mm |
Tensile Elongation | | ISO 527 | 460 | % |
Flexural Strength | | ISO 178 | 300 | Mpa |
Volume Resistivity | | IEC 60093 | 7.0E 13 | Ohm cm |
Surface Resistivity | | IEC 60093 | 3.0E 13 | Ohm |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melting Temperature | | ISO 3146C | 211 | °C |
Melt index | 2.16kg at 230℃ | ISO 1133 | 8 | g/10 min |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Shore Hardness (Shore D) | ISO 868 | IEC-707 | | |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
hardness | Shore D | ISO 868 | 63 | |
Other performance | Test Condition | Test Method | Test Result | Unit |
---|
Tensile strength | | ISO 527 | 36 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.