PPA Zytel® HTN42G30EF NC010 DUPONT JAPAN

Unit Price:
$6385 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Across Flow	ISO 294-4	0.90	%
Modeling Shrinkage	Modeling Shrinkage	流量	ISO 294-4	0.40	%
Biobased Carbon Content		ISO 16620-2	21	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Modulus		ISO 527-2	11700	Mpa
Flexural Modulus		ISO 178	11300	Mpa
Flexural Stress		ISO 178	210	Mpa
Tensile Stress	Break	ISO 527-2	134	Mpa
Tensile Strain	Break	ISO 527-2	1.7	%

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Linear thermal expansion coefficient	Flow	ISO 11359-2	2.0E-5	cm/cm/°C
	Linear thermal expansion coefficient	Flow : -40 to 23°C	ISO 11359-2	1.7E-5	cm/cm/°C
		Linear thermal expansion coefficient	Flow : 55 to 160°C	ISO 11359-2	2.0E-5	cm/cm/°C
			Linear thermal expansion coefficient	Across Flow	ISO 11359-2	5.1E-5	cm/cm/°C
				Linear thermal expansion coefficient	Across Flow : -40 to 23°C	ISO 11359-2	4.3E-5	cm/cm/°C
				Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow : 55 to 160°C	ISO 11359-2	8.4E-5	cm/cm/°C
Melting Temperature		ISO 11357-3	314	°C
RTI	0.40 mm	UL 746	125	°C
RTI	RTI	3.0 mm	UL 746	130	°C
RTI Imp	0.40 mm	UL 746	115	°C
RTI Imp	RTI Imp	3.0 mm	UL 746	120	°C
RTI Elec	0.40 mm	UL 746	130	°C
RTI Elec	RTI Elec	3.0 mm	UL 746	130	°C

Electrical performance	Test Method	Test Result	Unit
Dielectric Strength	IEC 60243-1	33	KV/mm
Comparative Tracking Index	IEC 60112	600	V
Volume Resistivity	IEC 62631-3-1	1.0E+16	ohms·m

Injection	Test Condition	Test Method	Test Result	Unit
Drying Temperature			100	°C
Drying time - Hot air dryer			6.0 到 8.0	hr
Suggested Max Moisture			0.10	%
Processing (Melt) Temp			325 到 335	°C
Mold Temperature			110 到 130	°C
Mold Temperature	Mold Temperature	Drying Recommended		yes

Impact Properties	Test Condition	Test Method	Test Result	Unit
Charpy Unnotched Impact Strength	-30°C	ISO 179/1eU	35	kJ/m²
Charpy Unnotched Impact Strength	Charpy Unnotched Impact Strength	23°C	ISO 179/1eU	35	kJ/m²

Flammability	Test Condition	Test Method	Test Result	Unit
Glow Wire Flammability Index	0.40 mm	IEC 60695-2-12	960	°C
	Glow Wire Flammability Index	1.5 mm	IEC 60695-2-12	960	°C
	Glow Wire Flammability Index	Glow Wire Flammability Index	3.0 mm	IEC 60695-2-12	960	°C
Glow Wire Ignition Temperature	0.40 mm	IEC 60695-2-13	750	°C
	Glow Wire Ignition Temperature	1.5 mm	IEC 60695-2-13	800	°C
	Glow Wire Ignition Temperature	Glow Wire Ignition Temperature	3.0 mm	IEC 60695-2-13	825	°C
Flame Rating	0.40 mm	UL 94, IEC 60695-11-10, -20	V-0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.