Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | Across Flow | ISO 294-4 | 0.50 | % |
Modeling Shrinkage | 流量 | ISO 294-4 | 0.50 | % |
Moisture Absorption | Saturation, 23°C | ISO 62 | 3.5 到 4.0 | % |
Melt Volume flow Rate | 275°C/5.0 kg | ISO 1133 | 9.00 | cm3/10min |
Humidity Absorption - 62% RH | 70°C | ISO 1110 | 1.1 | % |
Spiral Flow 1, 2 | | 内部方法 | 54.0 | CM |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Modulus | | ISO 178 | 16400 | Mpa |
Flexural Stress | | ISO 178 | 380 | Mpa |
Tensile Stress | Break | ISO 527-2/5 | 250 | Mpa |
Tensile Strain | Break | ISO 527-2/5 | 3.0 | % |
Tensile Modulus | | ISO 527-2/1 | 17500 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45 MPa, Unannealed | ISO 75-2/B | 245 | °C |
Deflection Temperature Under Load? | 1.8 MPa, Unannealed | ISO 75-2/A | 225 | °C |
Linear thermal expansion coefficient | Flow : 23 to 80°C | ISO 11359-2 | 1.5E-5 | cm/cm/°C |
Linear thermal expansion coefficient | Across Flow : 23 to 80°C | ISO 11359-2 | 6.5E-5 | cm/cm/°C |
Melting Temperature | | DIN EN 11357-1 | 255 | °C |
50% Loss of Tensile Strength, 20000 hr | | | 110 到 130 | °C |
50% Loss of Tensile Strength, 5000 hr | | | 140 到 150 | °C |
Vicat Softening Temperature | | ISO 306/B50 | 242 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Relative Permittivity | 1 MHz | IEC 60250 | 4.42 | |
Comparative Tracking Index | Solution A | IEC 60112 | 600 | V |
Surface Resistivity | | IEC 60093 | 1.5E+17 | ohms |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C | ISO 179/1eU | 95 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO 179/1eU | 110 | kJ/m² |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Ball Indentation Hardness | H 961/30 | ISO 2039-1 | 290 | Mpa |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Glow Wire Flammability Index | 1.6 mm | IEC 60695-2-12 | 700 | °C |
Burning Rate | 1.00 mm | FMVSS 302 | < 100 | mm/min |
Flame Rating | 0.8 mm | UL 94 | HB | |
Reinforcement Content | | ISO 1172 | 50 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.