Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD1 | 内部方法 | 0.20到0.30 | % |
Moisture Absorption | 23°C,24hr | ISO62 | 0.23 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | Break | ISO527-2/5 | 130 | Mpa |
Tensile Strain | Break | ISO527-2/5 | 2.1 | % |
Flexural Modulus | | ISO178 | 9900 | Mpa |
Flexural Stress | | ISO178 | 200 | Mpa |
Tensile Modulus | | ISO527-2/1 | 11400 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
1.8MPa, Unannealed,64.0mm Span | | ISO75-2/Af | 258 | °C |
0.45MPa, Unannealed,3.20mm Span | | ISO75-2/Bf | 275 | °C |
Linear thermal expansion coefficient | MD:23to60°C | ISO11359-2 | 2.1E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD:23to60°C | ISO11359-2 | 5.4E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | | IEC60112 | 600 | V |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Unnotched Izod Impact Strength | 23°C | ISO180/1U | 40 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180/1A | 5.0 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.800mm | UL94 | V-0 | |
Glow Wire Flammability Index | 1.50mm | IEC60695-2-12 | 960 | °C |
Glow Wire Ignition Temperature | 0.800mm | IEC60695-2-13 | 825 | °C |
Glow Wire Ignition Temperature | 1.60mm | IEC60695-2-13 | 825 | °C |
Glow Wire Ignition Temperature | 3.00mm | IEC60695-2-13 | 850 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.