Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Outdoor Suitability | | UL746C | f1 | |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
RTIElec | | UL746 | 90.0 | °C |
RTIStr | | UL746 | 90.0 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | 23°C,2.00mm | ASTMD149 | 28 | KV/mm |
Comparative Tracking Index | CTI | UL746 | PLC1 | |
Hot-wire Ignition | 1.5mm | UL746 | PLC2 | |
Hot-wire Ignition | 1.8mm | UL746 | PLC2 | |
Hot-wire Ignition | 3.0mm | UL746 | PLC1 | |
High Amp Arc Ignition | PLC | UL746 | PLC6 | |
Inclined-PlaneTracking | 2.5kV | ASTMD2303 | 107 | min |
High Amp Arc Ignition | HAI | UL746 | PLC0 | |
Elastomers Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress(Across Flow) | 100%Strain,23°C | ASTMD412 | 2.30 | Mpa |
Tensile Stress(Across Flow) | 100%Strain,23°C | ISO37 | 2.30 | Mpa |
Tensile Strength (flow) | Break,23°C | ASTMD412 | 4.80 | Mpa |
Tensile Strength (TD) | Break,23°C | ISO37 | 4.80 | Mpa |
Tensile Elongation(Across Flow) | Break,23°C | ASTMD412 | 480 | % |
Tensile Elongation(Across Flow) | Break,23°C | ISO37 | 480 | % |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Shore Hardness | Shore A,15sec,23°C | ISO868 | 75 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.5mm | UL94 | V-1 | |
UL flame retardant rating | 1.8mm | UL94 | V-15VA | |
UL flame retardant rating | 3.0mm | UL94 | V-15VA | |
Oxygen Index | | ASTMD2863 | 24 | % |
Oxygen Index | | ISO4589-2 | 24 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.