Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage - Flow | 3.20 mm | ASTM D955 | 1.1 到 1.4 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation | Break | ASTM D638 | 500 | % |
Tensile Strength | Yield | ASTM D638 | 6.55 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Brittleness Temperature | | ASTM D746 | -53.9 | °C |
Injection | Test Condition | Test Method | Test Result | Unit |
---|
Drying Temperature | | | 82 | °C |
Suggested Max Moisture | | | 0.080 | % |
Processing (Melt) Temp | | | 193 到 204 | °C |
Mold Temperature | | | 32 到 71 | °C |
Drying Time | | | 3.0 | hr |
Rear Temperature | | | 160 到 182 | °C |
Middle Temperature | | | 171 到 193 | °C |
Front Temperature | | | 182 到 204 | °C |
Nozzle Temperature | | | 182 到 204 | °C |
Back Pressure | | | 0.172 到 0.689 | Mpa |
Screw Speed | | | 25 到 75 | rpm |
Vent Depth | | | 0.013 到 0.038 | mm |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Shore Hardness | Shore A | ASTM D2240 | 95 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 1.0 mm | UL 94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.