Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Mass-Flow Rate | 190°C/2.16kg | ASTMD1238 | 1.0 | g/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Elmendorf Tear Strength | MD | ASTM D-1922 | 280 | g |
| Elmendorf Tear Strength | TD | ASTM D-1922 | 460 | g |
| Tensile Elongation (Break TD) | @厚 150μ(5.9mil) | ASTM D-882 | 700 | % |
| Tensile Elongation (Break MD) | @厚 150μ(5.9mil) | ASTM D-882 | 500 | % |
| Instrumented Dart Impact | F50 | ASTM D-1709A | 560 | g |
| Tensile Strength (Yield MD) | @厚 150μ(5.9mil) | ASTM D-882 | 9 | Mpa |
| Tensile Strength (Yield TD) | @厚 150μ(5.9mil) | ASTM D-882 | 9.7 | Mpa |
| Tensile Strength (Yield) | @厚 150μ(5.9mil) | ASTM D-882 | 75.8 | Mpa |
| Tensile Strength (Break TD) | @厚 150μ(5.9mil) | ASTM D-882 | 62.7 | Mpa |
| Flexural Modulus - 1% Secant | @厚 150μ(5.9mil) | ASTM D-882 | 183 | Mpa |
| 1%正割模量(TD) | @厚 150μ(5.9mil) | ASTM D-882 | 205 | Mpa |
| Film Puncture Force | | ExxonMobil Method | 4.3 | J |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Temperature | | ExxonMobil Method | 119 | °C |
| Film | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength (TD) | Yield | ASTMD882 | 9.40 | Mpa |
| Tensile Strain (TD) | Break | ASTMD882 | 600 | % |
| Elmendorf Tear Strength (MD) | | ASTMD1922 | 250 | g |
| Elmendorf Tear Strength (TD) | | ASTMD1922 | 470 | g |
| Gardner Impact | | ASTMD1709A | 460 | g |
| Tensile Strength (TD) | Break | ASTMD882 | 42.7 | Mpa |
| Secant Modulus (1%Secant,MD) | | ASTMD882 | 185 | Mpa |
| Secant Modulus (1%Secant,TD) | | ASTMD882 | 192 | Mpa |
| Tensile Strength-MD | Yield | ASTMD882 | 9.37 | Mpa |
| Tensile Strength-MD | Break | ASTMD882 | 54.3 | Mpa |
| Elongation - MD | Break | ASTMD882 | 500 | % |
| Other | Test Condition | Test Method | Test Result | Unit |
|---|
| PPA | | | 有 | |
| anti-sticking agent | | | 否 | |
| slip additive | | | 否 | |
| heat stabilizer | | | 有 | |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Gloss | Across Flow,45° | ASTM D-2457 | 42 | |
| Gloss | 45° | ASTMD2457 | 39 | |
| Haze | | ASTMD1003 | 18 | % |
| Haze | | ASTM D-1003 | 18 | % |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ExxonMobil Method | 0.918 | g/cm³ |
| Melt Mass-Flow Rate | | ASTM D-1238 | 1 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
