Technical Data Sheet
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | MPa | ASTM D638 | |
Tensile Strength | | MPa | ASTM D638 | 138 |
Flexural Modulus | | MPa | ASTM D790 | |
Flexural Strength | | MPa | ASTM D790 | 207 |
IZOD Notch Impact Strength | 3.18mm | J/m | ASTM D256 | 64.1 |
Tensile Elongation?(Break) | Break | % | ASTM D638 | 1.0 |
Unnotched Izod Impact Strength | 3.18mm | J/m | ASTM D256 | |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Coefficient of Linear Thermal Expansion | flow | cm/cm/°C | ASTM D696 | |
Deflection Temperature Under Load? | 0.45Mpa,Unannealed | ℃ | ASTM D648 | 207 |
Deflection Temperature Under Load? | 1.8Mpa,Unannealed | ℃ | ASTM D648 | 204 |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | ohm·cm | ASTM D257 | 1E+03 |
Surface resistance | | ohms | ASTM D257 | 1E+06 |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | 23℃24h | % | ASTM D570 | 0.40 |
Density | | g/cm³ | ASTM D792 | |
Modeling Shrinkage | flow,3.18mm | % | ASTM D955 | |
Other performance | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 1.59mm | | UL 94 | V-0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.