Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD:3.20mm | 内部方法 | 0.50到0.70 | % |
Melt Mass-Flow Rate | 337°C/6.6kg | ASTMD1238 | 16 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation | Break | ASTMD638 | 70 | % |
Flexural Modulus | 100mmSpan | ASTMD790 | 3720 | Mpa |
Tensile Strength | Yield | ASTMD638 | 110 | Mpa |
Tensile Modulus | | ASTMD638 | 3720 | Mpa |
Flexural Strength | Yield,100mmSpan | ASTMD790 | 165 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8MPa,Unannealed,6.40mm | ASTMD648 | 199 | °C |
RTIElec | | UL746 | 170 | °C |
Evolution Calendar intelligent importer | | UL746 | 170 | °C |
RTI | | UL746 | 170 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | CTI | UL746 | PLC4 | |
Arc Resistance | | ASTMD495 | PLC5 | |
Hot-wire Ignition | HWI | UL746 | PLC1 | |
High Amp Arc Ignition | HAI | UL746 | PLC3 | |
High Voltage Arc Tracking Rate | HVTR | UL746 | PLC2 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Reverse Notch Izod Impact | 3.20mm | ASTMD256 | 1900 | J/m |
Gardner Impact | 23°C | ASTMD3029 | 23.0 | J |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.75mm | UL94 | V-0 | |
UL flame retardant rating | 3.0mm | UL94 | 5VA | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.