Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD:3.20mm | 内部方法 | 0.50to0.70 | % |
Moisture Absorption | 24hr | ASTMD570 | 0.25 | % |
Moisture Absorption | Equilibrium,23°C | ASTMD570 | 1.3 | % |
Melt Mass-Flow Rate | 337°C/6.6kg | ASTMD1238 | 18 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Taber Abrasion Resistance | 1000Cycles,1000g,CS-17Wheel | ASTMD1044 | 10.0 | mg |
Tensile Elongation | Yield | ASTMD638 | 7.0 | % |
Tensile Modulus | | ASTMD638 | 3590 | Mpa |
Tensile Strength | Yield | ASTMD638 | 110 | Mpa |
Flexural Modulus | 100mmSpan | ASTMD790 | 3520 | Mpa |
Tensile Elongation | Break | ASTMD638 | 60 | % |
Flexural Strength | Yield,100mmSpan | ASTMD790 | 165 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Vicat Softening Temperature | | ASTMD15255 | 219 | °C |
Thermal Conductivity | | ASTMC177 | 0.22 | W/m/K |
Linear thermal expansion coefficient | MD:-20to150°C | ASTME831 | 5.6E-05 | cm/cm/°C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 207 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed,6.40mm | ASTMD648 | 199 | °C |
RTIElec | | UL746 | 170 | °C |
Evolution Calendar intelligent importer | | UL746 | 170 | °C |
RTIStr | | UL746 | 170 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dissipation Factor? | 1kHz | ASTMD150 | 1.3E-03 | |
Dissipation Factor? | 2.45GHz | ASTMD150 | 2.5E-03 | |
Dielectric Constant | 1kHz | ASTMD150 | 3.15 | |
Volume Resistivity | | ASTMD257 | 1E+17 | ohms·cm |
Dielectric Strength | 1.60mm,inAir | ASTMD149 | 33 | KV/mm |
Dielectric Strength | 1.60mm,in Oil | ASTMD149 | 28 | KV/mm |
Comparative Tracking Index | CTI | UL746 | PLC4 | |
Arc Resistance | | ASTMD495 | PLC5 | |
Hot-wire Ignition | HWI | UL746 | PLC1 | |
High Amp Arc Ignition | HAI | UL746 | PLC3 | |
High Voltage Arc Tracking Rate | HVTR | UL746 | PLC2 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Reverse Notch Izod Impact | 3.20mm | ASTMD256 | 1200 | J/m |
Gardner Impact | 23°C | ASTMD3029 | 33.9 | J |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Scale | ASTMD785 | 109 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Oxygen Index | | ASTMD2863 | 44 | % |
NBSSmokeDensity-Flaming,Ds,4min | | ASTME662 | 2.00 | |
UL flame retardant rating | 0.75mm | UL94 | V-0 | |
UL flame retardant rating | 3.0mm | UL94 | 5VA | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.