Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD:24hr | ASTMD955 | 0.10to0.30 | % |
Modeling Shrinkage | TD:24hr | ASTMD955 | 0.30to0.50 | % |
Modeling Shrinkage | TD:24hr | ISO294-4 | 0.39 | % |
Modeling Shrinkage | MD:24hr | ISO294-4 | 0.10 | % |
Moisture Absorption | 24hr,50%RH | ASTMD570 | 0.20 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.29 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | Break | ISO527-2 | 183 | Mpa |
Tensile Strain | Break | ISO527-2 | 1.1 | % |
Tensile Modulus | | ISO527-2/1 | 20900 | Mpa |
Tensile Elongation | Break | ASTMD638 | 1.3 | % |
Flexural Modulus | | ASTMD790 | 18200 | Mpa |
Flexural Modulus | | ISO178 | 17900 | Mpa |
Flexural Strength | | ASTMD790 | 280 | Mpa |
Flexural Stress | | ISO178 | 269 | Mpa |
Coefficient of Friction | Dynamic | ASTMD3702Modified | 0.52 | |
Coefficient of Friction | Static | ASTMD3702Modified | 0.48 | |
Tensile Modulus | | ASTMD638 | 19400 | Mpa |
Tensile Strength | Break | ASTMD638 | 197 | Mpa |
Specific Wear Rate | | ASTMD3702Modified | 75.0 | 10^-10in^5-min/ft-lb-hr |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 1.8MPa,Unannealed,64.0mmSpan | ISO75-2/Af | 219 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed,3.20mm | ASTMD648 | 218 | °C |
Linear thermal expansion coefficient | MD:-40to40°C | ASTME831 | 3.6E-05 | cm/cm/°C |
Linear thermal expansion coefficient | MD:-40to40°C | ISO11359-2 | 3.6E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD:-40to40°C | ASTME831 | 2.2E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD:-40to40°C | ISO11359-2 | 2.3E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | ASTMD257 | 1.0E+2to1.0E+6 | ohms |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Multi-Axial Instrumented Impact Energy | | ISO6603-2 | 2.47 | J |
Notched Izod Impact Strength | 23°C | ISO180/1A | 5.2 | kJ/m² |
UnnotchedIzodImpactStrength3 | 23°C | ISO180/1U | 26 | kJ/m² |
Instrumented Dart Impact | 23°C,EnergyatPeakLoad | ASTMD3763 | 7.80 | J |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.