Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD:3.20mm | 内部方法 | 0.50to0.70 | % |
Melt Mass-Flow Rate | 337°C/6.6kg | ASTMD1238 | 8.8 | g/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Strength | Yield,100mmSpan | ASTMD790 | 165 | Mpa |
Tensile Elongation | Break | ASTMD638 | 70 | % |
Tensile Modulus | | ASTMD638 | 3720 | Mpa |
Tensile Strength | Yield | ASTMD638 | 110 | Mpa |
Flexural Modulus | 100mmSpan | ASTMD790 | 3720 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
RTIElec | | UL746 | 170 | °C |
Evolution Calendar intelligent importer | | UL746 | 170 | °C |
RTIStr | | UL746 | 170 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed,6.40mm | ASTMD648 | 199 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Hot-wire Ignition | HWI | UL746 | PLC1 | |
High Amp Arc Ignition | HAI | UL746 | PLC3 | |
High Voltage Arc Tracking Rate | HVTR | UL746 | PLC2 | |
Arc Resistance | | ASTMD495 | PLC5 | |
Comparative Tracking Index | CTI | UL746 | PLC4 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Gardner Impact | 23°C | ASTMD3029 | 23.0 | J |
Reverse Notch Izod Impact | 3.20mm | ASTMD256 | 1500 | J/m |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.40mm | UL94 | V-2 | |
UL flame retardant rating | 0.75mm | UL94 | V-0 | |
UL flame retardant rating | 3.0mm | UL94 | 5VA | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.