PEI ULTEM™ HU1000-7HD395 SABIC INNOVATIVE US

Unit Price:
$11031 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Moisture Absorption	24 hr	ASTM D570	0.25	%
	Moisture Absorption	Saturation, 23°C	ISO 62	1.3	%
		Moisture Absorption	Equilibrium, 23°C	ASTM D570	1.3	%
		Moisture Absorption	Moisture Absorption	Equilibrium, 23°C, 50% RH	ISO 62	0.70	%
Melt Mass-Flow Rate	337°C/6.6 kg	ASTM D1238	9.0	g/10 min
Melt Volume flow Rate	220°C/5.0 kg	ISO 1133	13.0	cm3/10min
Modeling Shrinkage - Flow	3.20 mm	内部方法	0.50 到 0.70	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Flexural Stress	-- 5, 6	ISO 178	160	Mpa
Flexural Stress	Flexural Stress	Yield, 50.0 mm Span 4	ASTM D790	173	Mpa
Tensile Strength	Yield 3	ASTM D638	110	Mpa
	Tensile Strength	Yield	ISO 527-2/5	105	Mpa
		Tensile Strength	Break 3	ASTM D638	90.0	Mpa
		Tensile Strength	Tensile Strength	Break	ISO 527-2/5	85.0	Mpa
Tensile Modulus	-- 2	ASTM D638	3580	Mpa
Tensile Modulus	Tensile Modulus	--	ISO 527-2/1	3200	Mpa
Tensile Elongation	Yield 3	ASTM D638	7.0	%
	Tensile Elongation	Yield	ISO 527-2/5	6.0	%
		Tensile Elongation	Break 3	ASTM D638	60	%
		Tensile Elongation	Tensile Elongation	Break	ISO 527-2/5	60	%
Flexural Modulus	50.0 mm Span 4	ASTM D790	3430	Mpa
Flexural Modulus	Flexural Modulus	-- 5	ISO 178	3300	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Vicat Softening Temperature	--	ASTM D15259	218	°C
	Vicat Softening Temperature	--	ISO 306/B50	215	°C
	Vicat Softening Temperature	Vicat Softening Temperature	--	ISO 306/B120	211	°C
Deflection Temperature Under Load?	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	201	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span 8	ISO 75-2/Af	215	°C
Linear thermal expansion coefficient	Flow : -20 to 150°C	ASTM E831	5.6E-5	cm/cm/°C
	Linear thermal expansion coefficient	Flow : -40 to 40°C	ISO 11359-2	5.0E-5	cm/cm/°C
		Linear thermal expansion coefficient	Across Flow : -20 to 150°C	ASTM E831	5.4E-5	cm/cm/°C
		Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow : -40°C	ISO 11359-2	5.0E-5	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Comparative Tracking Index		UL 746	PLC 4
Hot-wire Ignition		UL 746	PLC 1
High Voltage Arc Tracking Rate		UL 746	PLC 2
High Amp Arc Ignition		UL 746	PLC 3
Arc Resistance		ASTM D495	PLC 5
Dielectric Strength	1.60 mm, in Air	ASTM D149	33	KV/mm
Dielectric Strength	Dielectric Strength	1.60 mm, in Oil	ASTM D149	28	KV/mm
Dissipation Factor?	1 kHz	ASTM D150	1.3E-3
Dissipation Factor?	Dissipation Factor?	2.45 GHz	ASTM D150	2.5E-3
Dielectric Constant	1 kHz	ASTM D150	3.15
Volume Resistivity		ASTM D257	1.0E+17	ohms·cm

Injection	Test Result	Unit
Drying Temperature	150	°C
Suggested Max Moisture	0.020	%
Processing (Melt) Temp	350 到 400	°C
Mold Temperature	135 到 165	°C
Drying Time	4.0 到 6.0	hr
Suggested Shot Size	40 到 60	%
Rear Temperature	330 到 400	°C
Middle Temperature	340 到 400	°C
Front Temperature	345 到 400	°C
Nozzle Temperature	345 到 400	°C
Back Pressure	0.300 到 0.700	Mpa
Screw Speed	40 到 70	rpm
Vent Depth	0.025 到 0.076	mm

Impact Properties	Test Condition	Test Method	Test Result	Unit
Instrumented Dart Impact	23°C, Total Energy	ASTM D3763	0.00	J
Unnotched Izod Impact Strength	23°C	ASTM D4812	1300	J/m

Flammability	Test Condition	Test Method	Test Result	Unit
Oxygen Index		ASTM D2863	47	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.