PEI ULTEM™ 2312-1000 SABIC INNOVATIVE SHANGHAI

Unit Price:
$17467 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
22.1MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Flow : 3.20 mm	内部方法	0.30 到 0.40	%
Modeling Shrinkage	Modeling Shrinkage	Across Flow : 3.20 mm	内部方法	0.45 到 0.55	%
Moisture Absorption	24 hr	ASTM D570	0.18	%
Moisture Absorption	Moisture Absorption	Equilibrium, 23°C	ASTM D570	0.98	%
Melt Mass-Flow Rate	337°C/6.6 kg	ASTM D1238	10	g/10 min

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Elongation	Break	ASTM D638	3.5	%
Flexural Modulus	100 mm Span	ASTM D790	6550	Mpa
Flexural Strength	Break, 100 mm Span	ASTM D790	179	Mpa
Tensile Modulus		ASTM D638	5990	Mpa
Tensile Strength	Break	ASTM D638	103	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Deflection Temperature Under Load?	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	207	°C
Linear thermal expansion coefficient	Flow : -20 to 150°C	ASTM E831	2.3E-5	cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow : -20 to 150°C	ASTM E831	2.7E-5	cm/cm/°C
RTI		UL 746	170	°C
RTI Imp		UL 746	170	°C
RTI Elec		UL 746	170	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Arc Resistance		ASTM D495	PLC 7
Dielectric Constant	1 kHz	ASTM D150	3.70
Dielectric Constant	Dielectric Constant	1 MHz	ASTM D150	3.49
Comparative Tracking Index		UL 746	PLC 4
Hot-wire Ignition		UL 746	PLC 1
High Amp Arc Ignition		UL 746	PLC 3
High Voltage Arc Tracking Rate		UL 746	PLC 0

Injection	Test Result	Unit
Drying Temperature	150	°C
Suggested Max Moisture	0.020	%
Processing (Melt) Temp	350 到 400	°C
Mold Temperature	135 到 165	°C
Drying Time	4.0 到 6.0	hr
Suggested Shot Size	40 到 60	%
Rear Temperature	330 到 400	°C
Middle Temperature	340 到 400	°C
Front Temperature	345 到 400	°C
Nozzle Temperature	345 到 400	°C
Back Pressure	0.300 到 0.700	Mpa
Screw Speed	40 到 70	rpm
Vent Depth	0.025 到 0.076	mm

Impact Properties	Test Condition	Test Method	Test Result	Unit
Reverse Notch Izod Impact	3.20 mm	ASTM D256	310	J/m

Flammability	Test Condition	Test Method	Test Result	Unit
Flame Rating	0.8 mm	UL 94	V-0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.