PEEK ZYPEEK® 770CA30 JILIN JOINATURE

Unit Price:
$51207 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
12MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Melt Mass-Flow Rate	380℃，5.0kg	ISO 1133	2.3	g/10min
Moisture Absorption	23℃，24hr，3.2 mm厚拉伸棒	ISO 62-1	0.04	%
Moisture Absorption	Moisture Absorption	Equilibrium，23℃	ISO 62-1	0.3	%
Modeling Shrinkage	MD	ISO 294-4	0.5	%
Modeling Shrinkage	Modeling Shrinkage	TD	ISO 294-4	0.1	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Shore Hardness	23℃	ISO 868	88	D 级
Compressive Strength	23℃	ISO 604	300	Mpa
Tensile Strength	Break，23℃	ISO 527	260	Mpa
Flexural Strength	Break，23℃	ISO 178	380	Mpa
Flexural Modulus	23℃	ISO 178	23000	Mpa
Tensile Strain	Break，23℃	ISO 527	1.7	%

Electrical	Test Condition	Test Method	Test Result	Unit
Volume Resistivity	23 ℃，1V	IEC 60093	10^5	ohms·cm

Impact Properties	Test Method	Test Result	Unit
Charpy Notched Impact Strength	ISO 179-1eA	7	kJ/m²
Notched Izod Impact Strength	ISO 180/A	9	kJ/m²
Charpy Unnotched Impact Strength	ISO 179/1U	45	kJ/m²
Unnotched Izod Impact Strength	ISO 180/U	45	kJ/m²

Thermal	Test Condition	Test Method	Test Result	Unit
Coefficient of Linear Thermal Expansion	低于Tg沿着Flow	ISO 11359	5	ppm/K
Coefficient of Linear Thermal Expansion	Coefficient of Linear Thermal Expansion	高于Tg沿着Flow	ISO 11359	6	ppm/K
Melting Temperature		ISO 11357	343	°C
Thermal Conductivity	23℃	ISO 22007-4	0.95	W/m/K
Heat Deflection Temperature	1.8 Mpa	ISO 75-f	336	°C
Glass Transition Temperature		ISO 11357	143	°C
Specific Heat	23℃	DSC	1.8	kJ/kg /℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.