Technical Data Sheet
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | 23°C | MPa | ASTM D638 | 94.0 |
Flexural Modulus | 23°C | MPa | ASTM D790 | 9600 |
Flexural Strength | 23°C | MPa | ASTM D790 | 147 |
Tensile Elongation?(Break) | Break,23°C | % | ASTM D638 | 2.0 |
IZOD Notch Impact Strength | 23°C | J/m | ASTM D256 | |
Unnotched Izod Impact Strength | 23°C | J/m | ASTM D4812 | 500 |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Thermal distortion temperature | 1.8 MPa,Unannealed | °C | ASTM D648 | 216 |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | 120°C, 3.20 mm | kV/mm | ASTM D149 | 26 |
Dielectric Strength | 200°C, 3.20 mm | kV/mm | ASTM D149 | |
Dielectric Strength | 23°C, 3.20 mm | kV/mm | ASTM D149 | > 28 |
Other | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 0.750 mm | | UL 94 | HB |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Density | | g/cm³ | ASTM D792 | 1.60 |
Modeling Shrinkage | Flow,3.20 mm | % | Internal Method | 0.30 |
Modeling Shrinkage | Across Flow,3.20 mm | % | Internal Method | 0.90 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.