Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | | ASTM D785 | 118 | |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Fracture strain | | ISO 527-1,-2 | 2.0 | % |
| Tensile Stress(Break) | | ISO 527-1,-2 | 19000 | psi |
| Notched Izod Impact Strength | 73℉ | ASTM D256 | 1.69 | ft·lb/in |
| Tensile Strength(Break) | | ASTM D638 | 18900 | psi |
| Tensile Modulus | | ISO 527-1,-2 | 1.61E+06 | psi |
| Tensile Elongation | Break | ASTM D638 | 2.0 | % |
| Flexural Modulus | -40℉ | ASTM D790 | 1.8E+06 | psi |
| Flexural Modulus | 73℉ | ASTMD 790 | 1.41E+06 | psi |
| Flexural Modulus | 248℉ | ASTM D790 | 431000 | psi |
| Flexural Strength | -40℉ | ASTM D790 | 39900 | psi |
| Flexural Strength | 73℉ | ASTM D790 | 30500 | psi |
| Flexural Strength | 248℉ | ASTM D790 | 12300 | psi |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 0.45MPa | ISO 75-1,-2 | 464 | ℉ |
| Deflection Temperature Under Load? | 1.80MPa | ISO 75-1,-2 | 410 | ℉ |
| Melting Temperature | | | 473 | ℉ |
| Flame retardancy | | UL94 | V-0 | |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Volume Resistivity | | IEC 60093 | ＞3.9E+12 | ohm·in |
| Dielectric Constant | 100HZ | IEC 60250 | 3.80 | |
| Dielectric Constant | 1MHz | IEC 60250 | 3.60 | |
| Other | Test Condition | Test Method | Test Result | Unit |
|---|
| Oxygen Index | | ISO 4589-1,-2 | 36 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
