Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD | | 0.30 | % |
| Modeling Shrinkage | TD | | 0.46 | % |
| Melt Mass-Flow Rate | 200℃/5.0 kg | ASTM D1238 | 9.0 | g/10 min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Elongation | Break | ASTM D412 | 600 | % |
| Tensile Strength | | ASTM D412 | 8.43 | Mpa |
| Shore Hardness | Shore A, 10 sec | ASTM D2240 | 78 | |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Brittleness Temperature | | | -40.0 | °C |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Adhesion to ABS | | | 5.5 | kN/m |
| Adhesion to PC | | | 4.7 | kN/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
