Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | ASTMD955 | 1.4 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Brittleness Temperature | | ASTMD746 | -63.0 | °C |
Aging Properties | Test Condition | Test Method | Test Result | Unit |
---|
Change in Tensile Strength in Air | 150°C,168hr | ASTMD573 | 140 | % |
Change in Ultimate Elongation in Air | | ASTMD573 | 130 | % |
Change in Durometer Hardness | 支撐A | ASTMD573 | 2.0 | |
Elastomers Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress (Flow) | 100%Strain,3.18mm | ASTMD412 | 1.38 | Mpa |
Tensile Stress (Flow) | 300%Strain,3.18mm | ASTMD412 | 2.07 | Mpa |
Tensile Stress (Flow) | 500%Strain | ASTMD412 | 3.45 | Mpa |
Tensile Strength (MD) | Yield,3.18mm | ASTMD412 | 5.52 | Mpa |
Tensile Elongation (MD) | Break,3.18mm | ASTMD412 | 700 | % |
Compression Set | 23°C,22hr | ASTMD395B | 15 | % |
Compression Set | 70°C,22hr | ASTMD395B | 38 | % |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Shore Hardness | Shore A | 内部方法 | 52到62 | |
Shore Hardness | Shore A2 | 内部方法 | 62 | |
Shore Hardness | Shore A,10sec | 内部方法 | 57 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Burning Rate | | FMVSS302 | 51 | mm/min |
Supplementary information | Test Condition | Test Method | Test Result | Unit |
---|
OzoneResistance5 | 38°C | ASTMD518/1149 | NoCracking | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.