Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ISO 1183 | 1.37 | g/cm³ |
Moisture Absorption | Saturation,23℃ Saturation,23℃ | ISO 62 | 4.5 | % |
Moisture Absorption | Equilibrium,23℃,50% RH Equilibrium,23℃,50% RH | ISO 62 | 0.8 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Break,-40℃ Break, -40°F | ISO 527-2 | 249 | Mpa |
Tensile Strength | Break,23℃ Break, 73°F | ISO 527-2 | 165 | Mpa |
Tensile Modulus | 23℃ 23℃ | ISO 527-2 | 9300 | Mpa |
Tensile Strain | Break,-40℃ Break, -40°F | ISO 527-2 | 3.6 | % |
Tensile Strain | Break,23℃ Break, 73°F | ISO 527-2 | 3.5 | % |
Electrical | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | | IEC 60112 | 600 | V |
Volume Resistivity | | IEC 60093 | > 1.0E+15 | ohms·cm |
Dielectric Constant | 1 MHz 1 MHz | IEC 60250 | 4.3 | |
Dissipation Factor? | 1 MHz 1 MHz | IEC 60250 | 0.03 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | 23℃ 23°C | ISO 179 | 19 | kJ/m² |
Notched Izod Impact Strength | 23℃ 23℃ | ISO 180 | 23 | kJ/m² |
Charpy Unnotched Impact Strength | -30℃ -30°C | ISO 179 | 90 | kJ/m² |
Charpy Unnotched Impact Strength | 23℃ 23°C | ISO 179 | 95 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 0.75 mm 0.75 mm | UL 94 | HB | |
Flame Rating | 1.50 mm 1.5 mm | UL 94 | HB | |
Flame Rating | 3.00 mm 3.0 mm | UL 94 | HB | |
Thermal | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 1.8 MPa,Unannealed 1.8 MPa,Unannealed | ISO 75-2/A | 240 | °C |
Coefficient of Linear Thermal Expansion | TD TD | | 0.000055 | 1/℃ |
Tensile Strength | 0.75 mm 0.75 mm | UL 746 | 120 | °C |
Notched Izod Impact Strength | 0.75 mm 0.75 mm | UL 746 | 100 | °C |
Melting temperature | DSC DSC | ISO 3146 | 295 | °C |
Coefficient of Linear Thermal Expansion | MD MD | | 0.000025 | 1/℃ |
Electrical performance | 0.75 mm 0.75 mm | UL 746 | 140 | °C |
电气性能 | 1.5 mm 1.5 mm | UL 746 | 140 | °C |
电气性能 | 3.0 mm 3.0 mm | UL 746 | 140 | °C |
Tensile Strength | 1.5 mm 1.5 mm | UL 746 | 140 | °C |
Tensile Strength | 3.0 mm 3.0 mm | UL 746 | 140 | °C |
Notched Izod Impact Strength | 1.5 mm 1.5 mm | UL 746 | 110 | °C |
Notched Izod Impact Strength | 3.0 mm 3.0 mm | UL 746 | 115 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.