PA6T Zytel® FR52G45NHF DUPONT USA

Unit Price:
$8472 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
20MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Across Flow	ISO 294-4	0.60	%
Modeling Shrinkage	Modeling Shrinkage	流量	ISO 294-4	0.20	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Stress	Break	ISO 527-2	167	Mpa
Tensile Strain	Break	ISO 527-2	1.7	%
Tensile Modulus		ISO 527-2	15500	Mpa
Flexural Modulus		ISO 178	15100	Mpa
Flexural Stress		ISO 178	249	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Linear thermal expansion coefficient	Flow	ISO 11359-2	1.5E-5	cm/cm/°C
	Linear thermal expansion coefficient	Flow : -40 to 23°C	ISO 11359-2	1.3E-5	cm/cm/°C
		Linear thermal expansion coefficient	Flow : 55 to 160°C	ISO 11359-2	1.4E-5	cm/cm/°C
			Linear thermal expansion coefficient	Across Flow	ISO 11359-2	5.0E-5	cm/cm/°C
				Linear thermal expansion coefficient	Across Flow : -40 to 23°C	ISO 11359-2	4.3E-5	cm/cm/°C
				Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow : 55 to 160°C	ISO 11359-2	8.0E-5	cm/cm/°C
Deflection Temperature Under Load?	1.8 MPa, Unannealed	ISO 75-2/A	284	°C
RTI Elec	0.40 mm	UL 746	140	°C
	RTI Elec	0.75 mm	UL 746	140	°C
		RTI Elec	1.5 mm	UL 746	140	°C
		RTI Elec	RTI Elec	3.0 mm	UL 746	140	°C
Melting Temperature		ISO 11357-3	310	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Volume Resistivity		IEC 62631-3-1	> 1.0E+13	ohms·m
Dielectric Strength		IEC 60243-1	40	KV/mm
Relative Permittivity	1 MHz	IEC 62631-2-1	4.40
Relative Permittivity	Relative Permittivity	100 Hz	IEC 62631-2-1	4.70
Comparative Tracking Index		IEC 60112	600	V
Dissipation Factor?	100 Hz	IEC 62631-2-1	6.0E-3
Dissipation Factor?	Dissipation Factor?	1 MHz	IEC 62631-2-1	0.012

Injection	Test Condition	Test Method	Test Result	Unit
Drying Temperature			100	°C
Drying time - Hot air dryer			6.0 到 8.0	hr
Suggested Max Moisture			0.10	%
Processing (Melt) Temp			320 到 325	°C
Mold Temperature			90 到 130	°C
Mold Temperature	Mold Temperature	Drying Recommended		yes

Impact Properties	Test Condition	Test Method	Test Result	Unit
Charpy Unnotched Impact Strength	-30°C	ISO 179/1eU	45	kJ/m²
Charpy Unnotched Impact Strength	Charpy Unnotched Impact Strength	23°C	ISO 179/1eU	48	kJ/m²

Flammability	Test Condition	Test Method	Test Result	Unit
Flame Rating	0.40 mm	UL 94, IEC 60695-11-10, -20	V-0
Glow Wire Flammability Index	0.40 mm	IEC 60695-2-12	960	°C
	Glow Wire Flammability Index	0.75 mm	IEC 60695-2-12	960	°C
		Glow Wire Flammability Index	1.5 mm	IEC 60695-2-12	960	°C
		Glow Wire Flammability Index	Glow Wire Flammability Index	3.0 mm	IEC 60695-2-12	960	°C
Glow Wire Ignition Temperature	0.40 mm	IEC 60695-2-13	700	°C
	Glow Wire Ignition Temperature	0.75 mm	IEC 60695-2-13	750	°C
		Glow Wire Ignition Temperature	1.5 mm	IEC 60695-2-13	750	°C
		Glow Wire Ignition Temperature	Glow Wire Ignition Temperature	3.0 mm	IEC 60695-2-13	800	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.