PA46 Stanyl® TS350 NA DSM HOLAND

Unit Price:
$7302 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
26.1MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Across Flow	ISO 294-4	1.5	%
Modeling Shrinkage	Modeling Shrinkage	流量	ISO 294-4	1.5	%
Moisture Absorption	Equilibrium, 23°C, 50% RH	ISO 62	2.4	%
Density		ISO 1183	1.43	g/cm³

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Stress	Yield	ISO 527-2	80.0	Mpa
Tensile Modulus		ISO 527-2	3400	Mpa
Flexural Modulus		ISO 178	3200	Mpa
Nominal Tensile Strain at Break		ISO 527-2	7.0	%

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Melting Temperature		ISO 11357-3	295	°C
Deflection Temperature Under Load?	1.8 MPa, Unannealed	ISO 75-2/A	190	°C
Linear thermal expansion coefficient	Flow	ISO 11359-2	8.0E-5	cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow	ISO 11359-2	9.0E-5	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric Strength		IEC 60243-1	30	KV/mm
Relative Permittivity	100 Hz	IEC 60250	3.80
Relative Permittivity	Relative Permittivity	1 MHz	IEC 60250	3.50
Volume Resistivity		IEC 60093	1.0E+15	ohms·cm

Impact Properties	Test Condition	Test Method	Test Result	Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	3.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	4.0	kJ/m²

Flammability	Test Condition	Test Method	Test Result	Unit
Flammability level	0.75 mm	IEC 60695-11-10, -20	V-0
Flammability level	Flammability level	1.5 mm	IEC 60695-11-10, -20	V-0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.