PA612 Grilon® CR-9-HV EMS-CHEMIE SWITZERLAND
41
- Unit Price:
- $7792 USD/MT
- Packaging Specification:
- 25KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
serv********
For more detailed information including pricing, customization, and shipping, please contact supplier.
Technical Data Sheet
| Additional | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| ISO Type | ISO 1874 | PA 6/12, FT, 22-020 | ||
| Gelboflextest Gelboflextest | 内部方法 | 800 | holes/m² |
| Films | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile Strain | MD，Yield MD : Yield | ISO 527-3 | 10 | % |
| TD，Yield TD : Yield | ISO 527-3 | 10 | % | |
| MD，Break MD : Break | ISO 527-3 | 800 | % | |
| TD，Break TD : Break | ISO 527-3 | 900 | % | |
| Tensile Strength | MD，Yield MD : Yield | ISO 527-3 | 30 | Mpa |
| TD，Yield TD : Yield | ISO 527-3 | 30 | Mpa | |
| MD，Break MD : Break | ISO 527-3 | 80 | Mpa | |
| TD，Break TD : Break | ISO 527-3 | 75 | Mpa | |
| Elmendorf Tear Strength | MD MD | ISO 6383-2 | 20 | N |
| TD TD | ISO 6383-2 | 20 | N | |
| Tearing Strength | MD MD | ISO 6383-1 | 65 | N/mm |
| TD TD | ISO 6383-1 | 65 | N/mm | |
| Water Vapor Transmission Rate | 23℃，85% RH 23℃，85% RH | DIS 15106-1/-2 | 15 | g/m²/24 hr |
| 物理性能 | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Density | ISO 1183 | 1.1 | g/cm³ | |
| Moisture Absorption | Saturation，23℃ Saturation, 73°F | ISO 62 | 9 | % |
| Equilibrium，23℃，50% RH Equilibrium, 73°F, 50% RH | ISO 62 | 2 | % | |
| Melt Volume flow Rate | 275℃，5 kg 275℃/5.0 kg | ISO 1133 | 30 | cm3/10min |
| 机械性能 | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile Modulus | ISO 527-2 | -- | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.