Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD Across Flow | ISO 294-4 | 1.1 | % |
Modeling Shrinkage | MD Flow | ISO 294-4 | 1.3 | % |
Moisture Absorption | Saturation,23℃ Saturation,23℃ | ISO 62 | 2.7 | % |
Moisture Absorption | Equilibrium,23℃,50% RH Equilibrium,23℃,50% RH | ISO 62 | 1 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ISO 527-2/1A | 2200 | Mpa |
Tensile Strength | Yield Yield | ISO 527-2/1A | 60 | Mpa |
Tensile Strain | Break Break | ISO 527-2/1A | > 50 | % |
Tensile Strain | Yield Yield | ISO 527-2/1A | 4 | % |
Electrical | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | IEC 60093 | 1000000000000000 | ohms·cm |
Dielectric Strength | | IEC 60243-1 | 27 | KV/mm |
Relative Permittivity | 100 Hz 100 Hz | IEC 60250 | 3.8 | |
Relative Permittivity | 1 MHz 1 MHz | IEC 60250 | 3 | |
Dissipation Factor? | 100 Hz 100 Hz | IEC 60250 | 0.023 | |
Dissipation Factor? | 1 MHz 1 MHz | IEC 60250 | 0.029 | |
Comparative Tracking Index | Solution A | IEC 60112 | > 600 | V |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | -30℃,Complete Break -22°F, Complete Break | ISO 179/1eA | 7 | kJ/m² |
Charpy Notched Impact Strength | 23℃,Complete Break 73°F, Complete Break | ISO 179/1eA | 7 | kJ/m² |
Charpy Unnotched Impact Strength | -30℃ -30°C | ISO 179/1eU | No Break | |
Charpy Unnotched Impact Strength | 23℃ 23°C | ISO 179/1eU | No Break | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 1.60 mm 1.6 mm | UL 94 | HB | |
Flame Rating | 3.20 mm 3.2 mm | UL 94 | HB | |
Thermal | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 1.8 MPa,Unannealed 264 psi, Unannealed | ISO 75-2/A | 60 | °C |
Heat Deflection Temperature | 1.8 MPa,Unannealed 264 psi, Unannealed 14 7 | ISO 75-2/A | 75 | °C |
Vicat Softening Temperature | Melting Temperature Melting Temperature 5 5 | ISO 11357-3 | 215 | °C |
Coefficient of Linear Thermal Expansion | MD:23~55℃ MD:23 to 55℃ | ISO 11359-2 | 0.00013 | 1/℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.