Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | Saturation,100°C2 | ISO62 | 1.9 | % |
Moisture Absorption | Saturation,23°C3 | ISO62 | 1.3 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.50 | % |
Moisture Absorption | 平均颗粒尺寸4 | ISO62 | 26 | µm |
Apparent Density | | ISO60 | >0.30 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Taber Abrasion Resistance | 100Cycles,500g,CS-17Wheel | ASTM D-676 | <1.00 | mg |
Tensile Stress | Yield | ISO527-2 | 43.0 | Mpa |
Tensile Strain | Yield | ISO527-2 | 6.0 | % |
Tensile Strain | Break | ISO527-2 | >100 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear thermal expansion coefficient | MD:23to55°C | ISO11359-2 | 1.1E-04 | cm/cm/°C |
Melting temperature (DSC) | | ISO3146 | 184 | °C |
Specific Heat | | ASTMD3354 | 2350 | J/kg/°C |
Thermal Conductivity | | DIN52612 | 0.23到0.29 | W/m/K |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | IEC60093 | 1E+14 | ohms·cm |
Dielectric Strength | | IEC60243-1 | 90 | KV/mm |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Ball Indentation Hardness | | ISO2039-1 | 90.0 | Mpa |
Shore Hardness | Shore D | ISO868 | 75 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.