Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | TD Across Flow | ISO 294-4 | 0.8 | % |
| Modeling Shrinkage | MD Flow | ISO 294-4 | 0.1 | % |
| Moisture Absorption | Saturation，23℃ Saturation, 73°F | ISO 62 | 1.1 | % |
| Moisture Absorption | Equilibrium，23℃，50% RH Equilibrium, 73°F, 50% RH | ISO 62 | 0.6 | % |
| Density | | ISO 1183 | 1.22 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Modulus | | ISO 527-2 | 6500 | Mpa |
| Electrical | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface Resistivity | | IEC 60093 | -- | ohms |
| Volume Resistivity | | IEC 60093 | -- | ohms·cm |
| Dielectric Strength | | IEC 60243-1 | -- | KV/mm |
| Comparative Tracking Index | | IEC 60112 | -- | V |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Unnotched Impact Strength | -30℃ -30°C | ISO 179/1eU | 90 | kJ/m² |
| Charpy Unnotched Impact Strength | 23℃ 23°C | ISO 179/1eU | 90 | kJ/m² |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame Rating | 0.8 mm 0.8 mm | IEC 60695-11-10, -20 | HB | |
| Thermal | Test Condition | Test Method | Test Result | Unit |
|---|
| Melting temperature | | ISO 11357-3 | 178 | °C |
| Coefficient of Linear Thermal Expansion | MD Flow | ISO 11359-2 | 0.000020 | 1/℃ |
| Coefficient of Linear Thermal Expansion | TD Transverse | ISO 11359-2 | 0.00015 | 1/℃ |
| Heat Deflection Temperature | 1.8 MPa，Unannealed 264 psi, Unannealed | ISO 75-2/A | 160 | °C |
| Heat Deflection Temperature | 8.0 MPa，Unannealed 1160 psi, Unannealed | ISO 75-2/C | 90 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
