Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Haze | | ASTM D-1003 | 1 | % |
| Transmittance | 厚度=2mm | DIN 5036-3 | 80 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Elongation at break | | ISO 527-2 | 35 | % |
| Tensile Elongation (Break) | | ISO 527-2 | 2 | % |
| Charpy Unnotched Impact Strength | ＋23℃/－30℃ | ISO 178/1eU | 80/25 | KJ/m |
| Shore Hardness (A/D) | | ISO 868 | A97/D65 | |
| Charpy Notched Impact Strength | ＋23℃/－30℃ | ISO 179/1eA | -/3.5 | KJ/m |
| Notched Izod Impact Strength | ＋23℃ | ISO 180/1A | 3 | KJ/m |
| Notched Izod Impact Strength | 23℃ | ASTM D-256 | 30 | J/m |
| Tensile Strength(Yield) | | ISO 527-2 | 30 | Mpa |
| Flexural Modulus | | ISO 178 | 1750 | Mpa |
| Flexural Strength | | ISO 178 | 40 | Mpa |
| Flexural Modulus | | ISO 527-2 | 1700 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8MPa | ISO 75 | 64 | °C |
| UL94 | 厚度3.2mm/1.6mm | UL 94 | HB/HB | CLASS |
| Melt Temperature | | | 180-250 | °C |
| Melt Temperature | | | 30-50 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistance | | IEC 243/1 | >10 | |
| Dielectric Constant | 10Hz-1MHz | IEC 250 | 2.5 | |
| Volume Resistivity | | IEC 93 | >10 | Ω.cm |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Moisture Absorption | 23℃,纯水中 | ISO 62 | 0.07 | % |
| Moisture Absorption | 23℃,50%湿度 | ISO 62 | 0.07 | % |
| Density / Specific Gravity | | ISO 1183 | 1.02 | g/cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
