Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD:3.00mm1 | 内部方法 | 0.50 | % |
Modeling Shrinkage | MD:3.00mm2 | 内部方法 | 0.20 | % |
Moisture Absorption | 23°C,24hr | ISO62 | 0.090 | % |
Modeling Shrinkage | TD: 3.00 mm | Internal Method | 0.50 | % |
Modeling Shrinkage | MD: 3.00 mm | Internal Method | 0.20 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | 23°C | ISO527-2 | 10000 | Mpa |
Flexural Modulus | 23°C | ISO178 | 10000 | Mpa |
Flexural Stress | 23°C | ISO178 | 190 | Mpa |
Tensile Stress | 23°C | ISO527-2 | 135 | Mpa |
Tensile Stress | Yield, 23℃ | ISO 527-2 | 130 | Mpa |
Tensile Strain | Break, 23℃ | ISO 527-2 | 2.3 | % |
Tensile Strain | Break,23°C | ISO527-2 | 2.2 | % |
Charpy Notched Impact Strength | 23℃ | ISO 179 | 9.5 | kJ/m² |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | | UL 94 | HB | |
0.45MPa, Unannealed | | ISO75-2/B | 209 | °C |
1.8MPa, Unannealed | | ISO75-2/A | 163 | °C |
Linear thermal expansion coefficient | MD:-30to100°C | ISO11359-2 | 4.2E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | | IEC60243-1 | 16 | KV/mm |
Volume Resistivity | | IEC60093 | 3E+16 | ohms·cm |
Dissipation Factor | 23°C,1MHz | IEC60250 | 0.010 | |
Dielectric Constant | 23°C,1kHz | IEC60250 | 3.80 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.