Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage (Across Flow) |
xflow, 1.5- | Internal | 0.5~0.8 | |
| Modeling Shrinkage (Across Flow) |
xflow, 3.2 | Internal | 0.8~1.1 | |
| Modeling Shrinkage(Across Flow) | flow, 1.5 | Internal | 0.4~0.6 | |
| Modeling Shrinkage(Across Flow) | flow, 3.2 | Internal | 0.6~0.9 | |
| Moisture Absorption | 24 hours | ASTM D570 | 0.07 | |
| Specific Volume | | | 0.71 | cm³/g |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength(Break) | Type I, 5 | ASTM D638 | 93 | Mpa |
| Tensile Elongation (Break) | Type I, 5 | ASTM D638 | 5 | % |
| Flexural Strain (Break) | 1.3 mm | ASTM D790 | 144 | Mpa |
| Flexural Modulus | 1.3 mm | ASTM D790 | 4820 | Mpa |
| Flammability Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame Rating | 10°C/min | UL94 | 0.71 | |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Notched Izod Impact Strength 23℃ | | | 53 | J/m |
| Notched Izod Impact Strength (23℃) | / | | 534 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness R | | ASTM D785 | 118 | R |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Coefficient of Linear Thermal Expansion(Flow) | -40°C to | ASTM E831 | 21.6 | E-6/°C |
| Coefficient of Linear Thermal Expansion(Flow) |
60°C to | ASTM E831 | 21.6 | E-6/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
