Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.20 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.15 | % |
Modeling Shrinkage | TD | ISO294-4 | 1.0到1.3 | % |
Modeling Shrinkage | MD | ISO294-4 | 0.40到0.50 | % |
Melt Volume flow Rate | 250°C/2.16kg | ISO1133 | 14.0 | cm3/10min |
Melt Volume flow Rate | 250°C/2.16kg | ISO1133 | 20.0 | cm3/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Creep Modulus | 1hr | ISO899-1 | 6200 | Mpa |
Tensile Creep Modulus | 1000hr | ISO899-1 | 4800 | Mpa |
Tensile Creep Modulus | 1hr | ISO899-1 | 3500 | Mpa |
Tensile Creep Modulus | 1000hr | ISO899-1 | 2400 | Mpa |
Flexural Stress | 23°C | ISO178 | 86.0 | Mpa |
Flexural Stress | 23°C | ISO178 | 170 | Mpa |
Tensile Stress | Break | ISO527-2/1A/5 | 50.0 | Mpa |
Tensile Stress | Break | ISO527-2/1A/5 | 125 | Mpa |
Tensile Strain | Break | ISO527-2/1A/5 | 3.0 | % |
Tensile Strain | Break | ISO527-2/1A/5 | 4.0 | % |
Tensile Modulus | | ISO527-2/1A/1 | 3500 | Mpa |
Tensile Modulus | | ISO527-2/1A/1 | 7400 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 220 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 195 | °C |
Deflection Temperature Under Load? | 8.0MPa,Unannealed | ISO75-2/C | 100 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 180 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 70.0 | °C |
Melting Temperature | | ISO11357-3 | 225 | °C |
Vicat Softening Temperature | | ISO306/B50 | 190 | °C |
Vicat Softening Temperature | | ISO306/B50 | 215 | °C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 3.5E-05 | cm/cm/°C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 1.1E-04 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC60093 | >1.0E+15 | ohms |
Volume Resistivity | | IEC60093 | >1.0E+15 | ohms·cm |
Dielectric Strength | | IEC60243-1 | 31 | KV/mm |
Dielectric Strength | | IEC60243-1 | 26 | KV/mm |
Relative Permittivity | 100Hz | IEC60250 | 4.40 | |
Relative Permittivity | 1MHz | IEC60250 | 4.20 | |
Relative Permittivity | 100Hz | IEC60250 | 4.20 | |
Relative Permittivity | 1MHz | IEC60250 | 4.10 | |
Comparative Tracking Index | | IEC60112 | 225 | V |
Comparative Tracking Index | | IEC60112 | 350 | V |
Dissipation Factor? | 100Hz | IEC60250 | 1.6E-03 | |
Dissipation Factor? | 1MHz | IEC60250 | 0.019 | |
Dissipation Factor? | 100Hz | IEC60250 | 8.5E-03 | |
Dissipation Factor? | 1MHz | IEC60250 | 0.018 | |
Fill Analysis | Test Condition | Test Method | Test Result | Unit |
---|
SpecificHeatCapacityofMelt | | 内部方法 | 1840 | J/kg/°C |
ThermalConductivityofMelt | | 内部方法 | 0.16 | W/m/K |
DensityofMelt | | 内部方法 | 1.230 | g/cm³ |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 34 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 34 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 46 | kJ/m² |
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 43 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.2mm | UL94 | HB | |
UL flame retardant rating | 1.5mm | UL94 | HB | |
UL flame retardant rating | 0.8mm | UL94 | HB | |
UL flame retardant rating | 1.6mm | UL94 | HB | |
Oxygen Index | | ISO4589-2 | 21 | % |
Oxygen Index | | ISO4589-2 | 20 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.