Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD | ISO294-4 | 0.80to1.3 | % |
Modeling Shrinkage | MD | ISO294-4 | 0.10to0.80 | % |
Density / Specific Gravity | | ISO1183 | 1.61 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Stress | 23°C | ISO178 | 175 | Mpa |
Tensile Stress | Break | ISO527-2/1A/5 | 115 | Mpa |
Tensile Strain | Break | ISO527-2/1A/5 | 2.5 | % |
Tensile Modulus | | ISO527-2/1A/1 | 9850 | Mpa |
Flexural Modulus | 23°C | ISO178 | 8950 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 202 | °C |
Melting Temperature | | ISO11357-3 | 225 | °C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 2.5E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 9E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Relative Permittivity | 1MHz | IEC60250 | 2.90 | |
Comparative Tracking Index | | ASTMD3638 | 250 | V |
Comparative Tracking Index | | IEC60112 | 250 | V |
Surface Resistivity | | IEC60093 | 1E+15 | ohms |
Volume Resistivity | | ASTMD257 | 4.4E+16 | ohms·cm |
Volume Resistivity | | IEC60093 | 1E+15 | ohms·cm |
Dissipation Factor? | 1MHz | IEC60250 | 0.015 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 8.5 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 0.75mm | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.