Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.46 | |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Ejection Temperature | | | 170 | °C |
Modeling Shrinkage | TD | ISO294-4 | 1.6 | % |
Modeling Shrinkage | MD | ISO294-4 | 1.8 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | Yield | ISO527-2 | 65.0 | Mpa |
Tensile Strain | Yield | ISO527-2 | 4.6 | % |
Tensile Modulus | | ISO527-2 | 3000 | Mpa |
Tensile Modulus | | ASTM D638/ISO 527 | 3000 | kg/cm²(MPa)[Lb/in²] |
Flexural Strength | | ASTM D790/ISO 178 | 100 | kg/cm²(MPa)[Lb/in²] |
Flexural Stress | | ISO178 | 100 | Mpa |
Nominal Tensile Strain at Break | | ISO527-2 | 7.2 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melting Temperature | | ISO11357-3 | 225 | °C |
Burning Rate | | UL94 | V-0 | |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 160 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 65.0 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | | IEC60243-1 | 33 | KV/mm |
Relative Permittivity | 100Hz | IEC60250 | 3.70 | |
Relative Permittivity | 1MHz | IEC60250 | 3.50 | |
Surface Resistivity | | IEC60093 | 1E+13 | ohms |
Volume Resistivity | | IEC60093 | >1.0E+15 | ohms·cm |
Dissipation Factor? | 100Hz | IEC60250 | 7.4E-04 | |
Dissipation Factor? | 1MHz | IEC60250 | 0.017 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 55 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 60 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.75mm | UL94 | V-0 | |
UL flame retardant rating | 1.5mm | UL94 | V-0 | |
UL flame retardant rating | 0.75mm | IEC60695-11-10,-20 | V-0 | |
UL flame retardant rating | 1.5mm | IEC60695-11-10,-20 | V-0 | |
Oxygen Index | | ISO4589-2 | 30 | % |
FMVSS Flammability | | FMVSS302 | DNI | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.