Technical Data Sheet
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ISO 527-2/1A/1 | 9200 | Mpa |
Tensile Elongation | Break | ISO 527-2/1A/5 | 2.7 | % |
Flexural Modulus | 23℃ | ISO 178 | 8900 | Mpa |
Flexural Strength | 23℃ | ISO 178 | 210 | Mpa |
Tensile Strength | Break | ISO 527-2/1A/5 | 135 | Mpa |
Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 6.5 | kJ/m² |
Unnotched Izod Impact Strength | 23℃ | ISO 180/1U | 35 | kJ/m² |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO 75-2/B | 225 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO 75-2/A | 208 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | IEC 60093 | 1E+15 | ohm·cm |
Dissipation Factor? | 1MHZ | IEC 60250 | 0.0022 | |
Arc Resistance | | IEC 60243-1 | 31 | KV/mm |
Relative Permittivity | 100HZ | IEC 60250 | 4.50 | |
Comparative Tracking Index | | IEC 60112 | 425 | V |
Other | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | | UL 94 | HB | |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Density / Specific Gravity | | ISO 1183 | 1.53 | g/cm³ |
Modeling Shrinkage | Across Flow | ISO 294-4 | 0.7-0.9 | % |
Modeling Shrinkage | 流量 | ISO 294-4 | 0.3-0.5 | % |
Moisture Absorption | 23℃,50%RH | ISO62 | 0.07 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.