Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.20 | % |
Flow | | ASTMD955 | 0.30到0.50 | % |
Vertical flow direction | | ISO294-4 | 0.70到1.1 | % |
Flow | | ISO294-4 | 0.30到0.70 | % |
Melt Mass-Flow Rate | | ASTMD1238 | 16 | g/10min |
Density / Specific Gravity | | ASTMD792,ISO1183 | 1.53 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Break,23℃ | | ASTMD638 | 2.0 | % |
Break,23℃ | | ASTMD638 | 134 | Mpa |
fracture | | ISO527-2/1A/5 | 130 | Mpa |
fracture | | ISO527-2/1A/5 | 2.5 | % |
Flexural Modulus | 23°C | ISO178 | 9700 | Mpa |
Flexural Stress | 23°C | ISO178 | 210 | Mpa |
23°C | | ASTMD638 | 9650 | Mpa |
断裂,-40°C | | ASTMD638 | 190 | Mpa |
断裂,-40°C | | ASTMD638 | 1.9 | % |
断裂,0°C | | ASTMD638 | 1.9 | % |
断裂,0°C | | ASTMD638 | 159 | Mpa |
断裂,80°C | | ASTMD638 | 77.2 | Mpa |
断裂,80°C | | ASTMD638 | 3.9 | % |
断裂,121°C | | ASTMD638 | 4.3 | % |
断裂,121°C | | ASTMD638 | 61.4 | Mpa |
-40°C | | ASTMD638 | 11000 | Mpa |
0°C | | ASTMD638 | 10500 | Mpa |
80°C | | ASTMD638 | 4830 | Mpa |
121°C | | ASTMD638 | 3760 | Mpa |
-- | | ISO527-2/1A/1 | 9200 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Vicat Softening Temperature | | ISO306/B50 | 220 | °C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 1E-04 | cm/cm/°C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 2.5E-05 | cm/cm/°C |
8.0Mpa, Unannealed | | ISO75-2/C | 150 | °C |
Glass Transition Temperature | | ISO11357-2 | 60.0 | °C |
0.45MPa Annealed | | ASTMD648 | 228 | °C |
Melting Temperature | | ISO11357-3,ASTMD3418 | 225 | °C |
0.45MPa, Unannealed | | ISO75-2/B | 225 | °C |
1.8MPa, Unannealed | | ASTMD648 | 206 | °C |
1.8MPa, Unannealed | | ISO75-2/A | 205 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | | IEC60112 | 425 | V |
Surface Resistivity | | IEC60093 | >1.0E+15 | ohms |
1MHz | | ASTMD150 | 3.70 | |
1MHz | | IEC60250 | 4.10 | |
1MHz | | ASTMD150,IEC60250 | 0.016 | |
100Hz | | IEC60250 | 2.2E-03 | |
100Hz | | IEC60250 | 4.50 | |
-- | | IEC60243-1 | 31 | KV/mm |
-- | | IEC60093 | >1.0E+15 | ohms·cm |
-- | | ASTMD257 | 1E+15 | ohms·cm |
--3 | | ASTMD149 | 22 | KV/mm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 45 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 46 | kJ/m² |
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 8.5 | kJ/m² |
Charpy Notched Impact Strength | -30°C | ISO179/1eA | 8.5 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180/1A | 7.5 | kJ/m² |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Sale | ISO2039-2 | 90 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.710mm | UL94 | HB | |
Oxygen Index | | ISO4589-2 | 20 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.