Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Ejection Temperature | | | 170 | °C |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Nominal Tensile Strain at Break | | ISO527-2 | 30 | % |
Tensile Modulus | | ISO527-2 | 2600 | Mpa |
Tensile Modulus | 0.00 mm, 23 ℃, Injection Molded | MPa | ISO 527-1, -2 | 2600 |
Flexural Strength | 0.00 mm, 23 ℃, 0.0 % | MPa | ISO 178 | 88 |
Tensile Stress | Yield | ISO527-2 | 59.0 | Mpa |
Tensile Strain | Yield | ISO527-2 | 8.0 | % |
Flexural Stress | | ISO178 | 88.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melting Temperature | | ISO11357-3 | 225 | °C |
Flame Rating | -,6.00 mm | | UL 94 | HB |
Flame Rating | -,3.00 mm | | UL 94 | HB |
Flame Rating | -,1.50 mm | | UL 94 | HB |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | | IEC60112 | 250 | V |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.5mm | UL94 | HB | |
UL flame retardant rating | 3.0mm | UL94 | HB | |
UL flame retardant rating | 1.5mm | IEC60695-11-10,-20 | HB | |
UL flame retardant rating | 3.0mm | IEC60695-11-10,-20 | HB | |
FMVSS Flammability | | FMVSS302 | SE | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.