Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.16 | % |
Density / Specific Gravity | | ASTMD792 | 1.66 | g/cm³ |
Density / Specific Gravity | | ISO1183 | 1.66 | g/cm³ |
Melt Volume flow Rate | 250°C/2.16kg | ISO1133 | 7.00 | cm3/10min |
Modeling Shrinkage | MD | ASTMD955 | 0.30to0.50 | % |
Modeling Shrinkage | TD | ISO294-4 | 0.80to1.3 | % |
Modeling Shrinkage | MD | ISO294-4 | 0.10to0.80 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | 23°C | ASTMD638 | 9650 | Mpa |
Tensile Modulus | | ISO527-2/1A/1 | 10700 | Mpa |
Tensile Strength | Break,23°C | ASTMD638 | 134 | Mpa |
Tensile Stress | Break | ISO527-2/1A/5 | 135 | Mpa |
Tensile Elongation | Break,23°C | ASTMD638 | 2.5 | % |
Tensile Strain | Break | ISO527-2/1A/5 | 2.5 | % |
Flexural Modulus | 23°C | ISO178 | 10300 | Mpa |
Flexural Stress | 23°C | ISO178 | 200 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 220 | °C |
Deflection Temperature Under Load? | 0.45MPa,Annealed | ASTMD648 | 221 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648 | 206 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 208 | °C |
Deflection Temperature Under Load? | 8.0MPa,Unannealed | ISO75-2/C | 165 | °C |
Vicat Softening Temperature | | ISO306/B50 | 225 | °C |
Peak Melting Temperature | | ASTMD3418 | 225 | °C |
Melting Temperature | | ISO11357-3 | 225 | °C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 2.5E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 7.7E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC60093 | 1E+15 | ohms |
Volume Resistivity | | ASTMD257 | 2E+16 | ohms·cm |
Volume Resistivity | | IEC60093 | 1E+15 | ohms·cm |
Dielectric Strength | | ASTMD149 | 20 | KV/mm |
Dielectric Strength | | IEC60243-1 | 34 | KV/mm |
Dielectric Constant | 1MHz | ASTMD150 | 3.50 | |
Relative Permittivity | 100Hz | IEC60250 | 3.60 | |
Relative Permittivity | 1MHz | IEC60250 | 2.90 | |
Dissipation Factor? | 1MHz | ASTMD150 | 0.020 | |
Dissipation Factor? | 100Hz | IEC60250 | 3.3E-03 | |
Dissipation Factor? | 1MHz | IEC60250 | 0.015 | |
Arc Resistance | | ASTMD495 | 106 | sec |
Comparative Tracking Index | | ASTMD3638 | 250 | V |
Comparative Tracking Index | | IEC60112 | 250 | V |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | -30°C | ISO179/1eA | 8.5 | kJ/m² |
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 8.5 | kJ/m² |
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 42 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 59 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180/1A | 7.7 | kJ/m² |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Scale | ISO2039-2 | 89 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.38mm | UL94 | V-0 | |
UL flame retardant rating | 1.5mm | UL94 | 5VA | |
Oxygen Index | | ISO4589-2 | 30 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.