Technical Data Sheet
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | | MPa | ASTM D638 | 112 |
Flexural Modulus | | MPa | ASTM D790 | |
Flexural Strength | | MPa | ASTM D790 | |
Tensile Elongation?(Break) | Break | % | ASTM D638 | 2.4 |
IZOD Notch Impact Strength | | J/m | ASTM D256 | 53.0 |
IZOD Notch Impact Strength | reverse | J/m | ASTM D256 | |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Thermal distortion temperature | 1.8MPa,Annealed | °C | ASTM D648 | 202 |
Coefficient of Linear Thermal Expansion | Transverse,23℃ | cm/cm/°C | ASTM D696 | 0.000045 |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | | V | UL 746 | 225 |
Dielectric Strength | 3.00mm | kV/mm | ASTM D149 | 23 |
Surface Resistivity | | ohms | ASTM D257 | 4E+15 |
Arc Resistance | | sec | ASTM D495 | |
Volume Resistivity | | ohm·cm | ASTM D257 | 4E+15 |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Density | | g/cm³ | ASTM D792 | 1.65 |
Other performance | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | | | UL 94 | V-0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.