Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD | ISO294-4 | 1.6 | % |
Modeling Shrinkage | MD | ISO294-4 | 1.7 | % |
Moisture Absorption | Saturation,23°C,2.00mm | ISO62 | 0.40 | % |
Moisture Absorption | Equilibrium,23°C,2.00mm,50%RH | ISO62 | 0.20 | % |
Melt Mass-Flow Rate | 250°C/2.16kg | ISO1133 | 19 | g/10min |
Viscosity number | | ISO307 | 130 | cm³/g |
Density / Specific Gravity | | ISO1183 | 1.31 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Stress | | ISO178 | 88.0 | Mpa |
Nominal Tensile Strain at Break | | ISO527-2 | 30 | % |
Tensile Stress | Yield | ISO527-2 | 59.0 | Mpa |
Tensile Strain | Yield | ISO527-2 | 8.0 | % |
Tensile Creep Modulus | 1hr | ISO899-1 | 2600 | Mpa |
Tensile Creep Modulus | 1000hr | ISO899-1 | 1800 | Mpa |
Tensile Modulus | | ISO527-2 | 2600 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 145 | °C |
Deflection Temperature Under Load? | 0.45MPa,Annealed | ISO75-2/B | 180 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 60.0 | °C |
Deflection Temperature Under Load? | 1.8MPa,Annealed | ISO75-2/A | 60.0 | °C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 1.3E-04 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 1.3E-04 | cm/cm/°C |
Vicat Softening Temperature | | ISO306/B50 | 175 | °C |
Melting Temperature | | ISO11357-3 | 225 | °C |
Peak Crystallization Temperature | | ISO11357-3 | 192 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Relative Permittivity | 100Hz | IEC60250 | 3.80 | |
Relative Permittivity | 1MHz | IEC60250 | 3.20 | |
Comparative Tracking Index | | IEC60112 | 600 | V |
Dielectric Strength | | IEC60243-1 | 26 | KV/mm |
Dissipation Factor? | 100Hz | IEC60250 | 2E-03 | |
Dissipation Factor? | 1MHz | IEC60250 | 0.020 | |
Volume Resistivity | | IEC60093 | >1.0E+15 | ohms·cm |
Fill Analysis | Test Condition | Test Method | Test Result | Unit |
---|
Melt Density | | | 1.11 | g/cm³ |
Ejection Temperature | | | 170 | °C |
SpecificHeatCapacityofMelt | | | 2100 | J/kg/°C |
ThermalConductivityofMelt | | | 0.21 | W/m/K |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod impact strength | -30°C | ISO180/1U | 70 | kJ/m² |
Notched Izod impact strength | 23°C | ISO180/1U | 140 | kJ/m² |
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 无断裂 | |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 无断裂 | |
Charpy Notched Impact Strength | -30°C | ISO179/1eA | 3.5 | kJ/m² |
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 4.5 | kJ/m² |
Notched Izod Impact Strength | -30°C | ISO180/1A | 5.0 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180/1A | 4.0 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
FMVSS Flammability | | FMVSS302 | SE/NBR | |
UL flame retardant rating | 0.8mm | UL94,IEC60695-11-10,-20 | HB | |
UL flame retardant rating | 1.5mm | UL94,IEC60695-11-10,-20 | HB | |
Oxygen Index | | ISO4589-2 | 22 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.