Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | | ASTMD1238 | 14 | g/10min |
Flow | | ASTMD955 | 0.30到0.50 | % |
Flow | | ISO294-4 | 0.30到0.50 | % |
Density | | ASTMD792,ISO1183 | 1.52 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Fracture, | | ASTMD638 | 124 | Mpa |
Fracture, | | ASTMD638 | 4.0 | % |
fracture | | ISO527-2/1A/5 | 135 | Mpa |
fracture | | ISO527-2/1A/5 | 2.6 | % |
Flexural Stress | 23°C | ISO178 | 210 | Mpa |
Flexural Modulus | 23°C | ISO178 | 9110 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear thermal expansion coefficient | MD | ISO11359-2 | 2.5E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 1.3E-04 | cm/cm/°C |
Melting temperature | | ISO11357-3,ASTMD3418 | 225 | °C |
Glass Transition Temperature | | ISO11357-2 | 60.0 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | | ASTMD149 | 20 | KV/mm |
Volume Resistivity | | ASTMD257 | 1E+16 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 7.2 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180/1A | 9.2 | kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.