Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.45 | |
Moisture Absorption 23℃/24H | | ASTM D570/ISO 62 | 0.15 | % |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Hygroscopicity | -,空气中 | | 0.15 | % |
Hygroscopicity | -,水中 | | 0.30 | % |
Hygroscopicity | -,空气中 | | 0.2 | % |
Hygroscopicity | -,水中 | | 0.6 | % |
Melting Temperature | | | 223 | °C |
Melting Temperature | | | 223 | °C |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
IZOD Notch Impact Strength | -,23℃ | | 8.0 | KJ/m |
IZOD Notch Impact Strength | -,-30℃ | | 8.0 | KJ/m |
Tensile Modulus | | ASTM D638/ISO 527 | 7500 | kg/cm²(MPa)[Lb/in²] |
Tensile Modulus | | | 7500 | Mpa |
Tensile Modulus | | | 11000 | Mpa |
Tensile Strength | | | 140 | Mpa |
Tensile Strength | | | 120 | Mpa |
Tensile Strength | | ASTM D638/ISO 527 | 120 | kg/cm²(MPa)[Lb/in²] |
Tensile Elongation | Break | | 3.5 | % |
Tensile Elongation | Break | | 2.5 | % |
Izod notch impact strength | | ASTM D256/ISO 179 | 50 | kg·cm/cm(J/M)ft·lb/in |
Izod notch impact strength | | ASTM D256/ISO 179 | 45 | kg·cm/cm(J/M)ft·lb/in |
Charpy impact strength | | ASTM D256/ISO 179 | 10 | kg·cm/cm(J/M)ft·lb/in |
Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 3.5 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flame retardancy | | | HB | |
Flame retardancy | | | V-0 | |
Deflection Temperature Under Load? | -,1.8Mpa | | 210 | °C |
Deflection Temperature Under Load? | -,0.45Mpa | | 220 | °C |
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 205 | ℃(℉) |
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 220 | ℃(℉) |
Deflection Temperature Under Load? | -,1.8Mpa | | 205 | °C |
Deflection Temperature Under Load? | -,0.45Mpa | | 220 | °C |
Melting Temperature | | | 223 | ℃(℉) |
Linear expansion coefficient | | ASTM D696/ISO 11359 | 50 | mm/mm.℃ |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | | | 30 | MV/m |
Arc Resistance | | | 400 | V |
Dielectric Constant | -,1MHz | | 3.2 | |
Dielectric Constant | | ASTM D150/IEC 60250 | 3.2 | |
Dielectric Constant | -,50Hz | | 3.2 | |
Dielectric Constant | -,50Hz | | 3.4 | |
Dielectric Constant | -,1MHz | | 3.4 | |
Arc Resistance | | ASTM D495/IEC 60112 | 400 | |
Other | Test Condition | Test Method | Test Result | Unit |
---|
Oxygen Index | | | 30 | % |
Other performance | Test Condition | Test Method | Test Result | Unit |
---|
Oxygen Index | | | 19 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.