Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | ASTMD955 | 0.40to0.60 | % |
Modeling Shrinkage | TD | ISO294-4 | 1.1 | % |
Modeling Shrinkage | MD | ISO294-4 | 0.30to0.60 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.17 | % |
Melt Volume flow Rate | 250°C/2.16kg | ISO1133 | 9.00 | cm3/10min |
Density / Specific Gravity | | ASTMD792 | 1.54 | g/cm³ |
Density / Specific Gravity | | ISO1183 | 1.54 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Break,23°C | ASTMD638 | 100 | Mpa |
Flexural Stress | 23°C | ISO178 | 155 | Mpa |
Tensile Stress | Break | ISO527-2/1A/5 | 100 | Mpa |
Tensile Strain | Break | ISO527-2/1A/5 | 3.0 | % |
Tensile Modulus | | ISO527-2/1A/1 | 6700 | Mpa |
Tensile Elongation | Break,23°C | ASTMD638 | 4.0 | % |
Flexural Modulus | 23°C | ISO178 | 6000 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 200 | °C |
Deflection Temperature Under Load? | 8.0MPa,Unannealed | ISO75-2/C | 95.0 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 217 | °C |
Deflection Temperature Under Load? | 0.45MPa,Annealed | ASTMD648 | 213 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648 | 185 | °C |
Linear thermal expansion coefficient | MD | ISO11359-2 | 3.6E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 1E-04 | cm/cm/°C |
Vicat Softening Temperature | | ISO306/B50 | 206 | °C |
Glass Transition Temperature | | ISO11357-2 | 60.0 | °C |
Peak Melting Temperature | | ASTMD3418 | 225 | °C |
Melting Temperature | | ISO11357-3 | 225 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Relative Permittivity | 100Hz | IEC60250 | 3.70 | |
Relative Permittivity | 1MHz | IEC60250 | 3.50 | |
Comparative Tracking Index | | ASTMD3638 | 250 | V |
Comparative Tracking Index | | IEC60112 | 250 | V |
Dielectric Strength | | ASTMD149 | 26 | KV/mm |
Dissipation Factor? | 1MHz | ASTMD150 | 0.010 | |
Dissipation Factor? | 100Hz | IEC60250 | 3.3E-03 | |
Dissipation Factor? | 1MHz | IEC60250 | 0.016 | |
Dielectric Strength | | IEC60243-1 | 30 | KV/mm |
Surface Resistivity | | IEC60093 | 1E+15 | ohms |
Dielectric Constant | 1MHz | ASTMD150 | 3.20 | |
Arc Resistance | | ASTMD495 | 79.0 | sec |
Volume Resistivity | | ASTMD257 | 2E+16 | ohms·cm |
Volume Resistivity | | IEC60093 | 1E+15 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 28 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 28 | kJ/m² |
Charpy Notched Impact Strength | -30°C | ISO179/1eA | 6.0 | kJ/m² |
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 6.0 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180/1A | 5.5 | kJ/m² |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Scale | ISO2039-2 | 87 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 0.38mm | UL94 | V-0 | |
UL flame retardant rating | 3.0mm | UL94 | 5VA | |
Oxygen Index | | ISO4589-2 | 27to32 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.