Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 1.50-1.52 | |
| Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 17-23 | g/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength | | ASTM D638 | 900-1100 | kg/cm |
| Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 4.0-5.5 | % |
| Tensile Modulus | | ASTM D638/ISO 527 | 45000-65000 | kg/cm²(MPa)[Lb/in²] |
| Tensile Strength | | ASTM D638/ISO 527 | 900-1100 | kg/cm²(MPa)[Lb/in²] |
| Tensile Elongation | | CCP METHOD | 4.0-5.5 | % |
| Impact Strength | | ASTM D256 | 5.0-7.5 | kg-cm/cm |
| Tensile Strength | | ASTM D790 | 1400-1800 | kg/cm |
| Tensile Modulus | | ASTM D790 | 45000-65000 | kg/cm |
| Izod notch impact strength | | ASTM D256/ISO 179 | 5.0-7.5 | kg·cm/cm(J/M)ft·lb/in |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame Rating | 1/32 INCH | UL | 94 V-0 | |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | | ASTM D1238 | 17-23 | g/10min |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Ash content | | | 14-16 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
