Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.62-1.68 | |
Modeling Shrinkage | | ASTM D955 | 0.1-0.4/0.8-1.1 | % |
Moisture Absorption 23℃/24H | | ASTM D570/ISO 62 | 0.03 | % |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | Flow ,- | ASTM D955 | 0.1-0.4 | % |
Modeling Shrinkage | Across Flow ,- | ASTM D955 | 0.8-1.1 | % |
Moisture Absorption | 24hr immersion | ASTM D570 | 0.03 | % |
glass fiber content | | Ash | 30 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation | | ASTM D638 | 2.5-4.5 | % |
Flexural strength | | ASTM D790 | 1500-2300 | kg/cm |
Tensile strength | | ASTM D638 | 1100-1400 | kg/cm |
Tensile Modulus | | ASTM D790 | ≥70000 | kg/cm |
hardness | | ASTM D785 | 94 | M-scale |
Tensile Strength | | ASTM D638/ISO 527 | 1100-1400 | kg/cm²(MPa)[Lb/in²] |
Rockwell Hardness | | ASTM D785 | 94 | |
Flexural Modulus | | ASTM D790/ISO 178 | 》70000 | kg/cm²(MPa)[Lb/in²] |
Flexural Strength | | ASTM D790/ISO 178 | 1500-2300 | kg/cm²(MPa)[Lb/in²] |
Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 2.5-4.5 | % |
Izod Impact Strength | 切口1/4″ | ASTM D256 | 7-13 | kg-cm/cm |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flame resistance | 0.8mm | UL94 | V-0 | |
Deflection Temperature Under Load? | 18.6kg/cm | ASTM D648 | 208(220) | °C |
Coefficient of Linear Thermal Expansion | | ASTM D696 | 3 | |
Melting Temperature | | DSC | 225 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | ASTM D257/IEC 60093 | 》10 | Ω |
Arc Resistance | | ASTM D495/IEC 60112 | 100 | |
Arc Resistance | | ASTM D495 | 100 | sec |
Volume Resistivity | | ASTM D257/IEC 60093 | 》10 | Ω.cm |
Dielectric Constant | | ASTM D150 | 0.001 | 60Hz |
Volume Resistivity | | ASTM D257 | >10 | Ω-cm |
Surface Resistivity | | ASTM D257 | >10 | Ω |
Dissipation Factor | | ASTM D150 | 3 | 60Hz |
Insulation failure strength | 2mm | ASTM D149 | >20 | KV/mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.